TRS21 Anti-spark/explosion pump

TRS21 Anti-spark/explosion pump

Product Code: TRS211
Availability:
In Stock
Price: $1,000.00
Description

•••••••••••••••••••••••••••••••••••••Pump Warranty Information•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
•Customers using solvents such as stabilization resins (Cactus Juice™, MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes.
•If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
•These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties. 

•When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
•To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
 

The TRS21 is an Anti-Spark/Explosion pump designed and build specifically for R-600, Ignition Proof Construction meets ANSI/ISA 12:12.1
The pump can be used to recirculate the solvent through the system increasing speed of processing and yield, or just to reclaim the solvent to greatly increase recovery time to minutes.

Key Features:

CPS TRS21 R-600 Recovery Pump, 2 Cylinder Oil-Less

 

Specifications: •Recovery Rates: Vapor- 2.5lb/min, Liquid-12lb/min
•Ignition Proof Construction ANSI/ISA 12:12.1
•Power : 115 VAC, 60 Hz, 10 Amps
•Power: 850 watts 
•Filtration: Internal 100 mesh Screen integrated into Suction Port
Compressor Seals will require re-build after 200-240hrs of use)
Rebuild Kit: coming soon(rebuild time 20mins)
Weight : 24 LBS

 

Note: No Discounts on Extraction supplies

Reviews (0)

Write a review



Note: HTML is not translated!

Bad            Good